Emboply
Saunaplex panel with embossed surface, which gives three-dimensionality and a greater rustic effect to the cabin, without compromising the strength and technical characteristics of the plywood.
Data sheet
| Dimension (mm) | 2500×1250 mm 3100×1250 mm Maximum width 125 Other sizes available upon request |
| Thicknesses (mm) | 16 mm – 7 layers (Plys). 14 mm – 7 layers (Plys). Other thicknesses available upon request. |
| Gluing | EN 314-1 Class 2 suitable for use in humid conditions Norm M 6219-1. |
| Quality | Boards are veneered one side with a balancer reverse. The face veneer is 0.6 mm thick as standard, however other thicknesses are available upon request. |
| Face veneers | Hemlock, Oak, Maple, Birch, American Walnut, Acacia, Stone Pine, Teak, Larch, Elm, Ash, Cedar, Aspen. Other species of face veneers are available upon request. |
Ask for informationabout Plywood for saunas with an embossed surface
Other products for Saunas
Antiko
Panel for saunas fittings made up of naturally sunburnt aged spruce planks of various widths, free of additives or chemical agents. The planks are carefully selected to give a rustic effect which is at the same time homogeneous and pleasant in color and structure. The...
Michelangelo
Natural stone suitable for internal use of saunas. Internal plywood meets the requirements Önorm M 6219-1. The naturalness of the product leads to slight chromatic and grain variations on the various sides. Dimension (mm) 2400x1200 mm Thicknesses (mm) 16 mm - 6 layers...
Saunaplex
Veneered plywood suitable for use in the interior decoration of Saunas. The board consists of Fromager cores with sliced cut face veneers suitable for this application. This plywood is specifically designed for this purpose due to its low formaldehyde emissions,...